2015年11月27日星期五

Separator Operation



1. The separator must be fully checked before work properly if the ministries operating mechanism, the guide arm with a thin cotton wipe clean and press the lubricant grades oiling.
2. magnetic separator arm and headstock locking ministries, in order to operate.
3. The ceramic magnetic separator can not have obstacles within arm swing range.
4. Before opening splintered mechanical separator, magnetic separation machine table, the workpiece, fixtures, cutting tools, you must find a positive fastening.
5. Separator correct selection of spindle speed, feed rate, can not overload to use.
6. drilling beyond the table, the workpiece must be stable.
7. Magnetic Machine tools in operation and automatic feed, not allowed to change the tightening exchange rate, if the shift spindle can be completely stopped, it can take place.
8. Separator cutting tools and measuring the workpiece loading and unloading must be carried down, not allowed to directly holding the workpiece drilling, shall not wear gloves.
9. Separator work were found to have abnormal sound, you must immediately stop check troubleshooting

没有评论:

发表评论