Separator Operation

1. The separator must be fully checked before work properly if the ministries operating mechanism, the guide arm with a thin cotton wipe clean and press the lubricant grades oiling.
2. magnetic separator arm and headstock locking ministries, in order to operate.
3. The ceramic magnetic separator can not have obstacles within arm swing range.
4. Before opening splintered mechanical separator, magnetic separation machine table, the workpiece, fixtures, cutting tools, you must find a positive fastening.
5. Separator correct selection of spindle speed, feed rate, can not overload to use.
6. drilling beyond the table, the workpiece must be stable.
7. Magnetic Machine tools in operation and automatic feed, not allowed to change the tightening exchange rate, if the shift spindle can be completely stopped, it can take place.
8. Separator cutting tools and measuring the workpiece loading and unloading must be carried down, not allowed to directly holding the workpiece drilling, shall not wear gloves.
9. Separator work were found to have abnormal sound, you must immediately stop check troubleshooting

Wet permanent drum magnetic separator

Wet permanent magnet made in the form of cylindrical magnetic separator body is counter-current. It's feeding direction and the movement direction opposite the direction of rotation or circular simple magnetic substance. Material from below the magnetic system to feed tank directly into the cylinder. On the left side of the bottom plate of non-magnetic material by the magnetic system beneath the discharge port discharge. Feed material against the feed direction with the cylinder to move the discharge end of the magnetic substance, a magnetic substance into the collection tank. The device is suitable for size "0. 6 mm pre-ferromagnetic particles recovered as iron recovery and recycling dense media separation products in heavy medium iron dust and mud and iron oxide skin.

On dry magnetic separator

dry magnetic separators equipment is commonly used in iron and manganese equipment, the mainstream of the strong magnetic separator beneficiation equipment. Divided into: a three-roll tube dry high intensity magnetic separation machine, two cylinder two rollers dry magnetic separator, a barrel roll a dry magnetic separator; dry high intensity magnetic disc magnetic separator is widely used in sorting less than 2 -3 mm of weakly magnetic minerals and rare metal ores selection again. It has a single disc (diameter φ = 900 mm) Double (φ = 576 mm) of and three (φ = 600 mm) of three. Magnetic field strength up to 880-1440 kA / m. Among φ576 mm double disc used more often. The main part of magnetic separator is a "mountain" shape suspension electromagnet and the rotatable disc composed of induction. Disc like a saucer turned upside down with the tines of one of its diameter than the width of the belt to mine about sophomore points, disk using worm gear reducer, adjustable pole between the disc and the electromagnet by handwheel distance (adjustment range 0-20) mm. To prevent clogging, the ore cylinder built with a weak magnetic field, can be pre-discharge to feed the strong magnetic minerals.

About Magnetic Separator

magnetic separator is one of the most extensive, highly versatile models in the industry for having a separation of the magnetic material difference. Magnetic Separator is widely used in mining, the timber industry, ceramics, chemical, food and other industries. And for the mining industry, the magnetic separator is suitable for particle size less than 50mm of manganese ore, magnetite, pyrrhotite, roasted ore, ilmenite, hematite limonite and other materials, wet or dry magnetic separation, but also with in addition to iron work in coal, non-metallic minerals, building materials and other materials. Magnetic separator magnetic system is divided into two categories, permanent magnetic separator, the more high-quality ferrite material or rare earth magnets composite made earlier times, drum magnetssurface 80 to the average magnetic induction 400mT. With the continuous development of technology, can be made into a roll-shaped separator after the magnetic field strength is increased to 1650mT, already it is the highest measured magnetic field strength.

Magnetic Separator

According to the type of magnet points can be divided into: permanent magnetic separator and electromagnetic iron machine
Classified in accordance with wet ore can be divided into: iron dry, wet iron machine
Classified in accordance with the magnetic system can be divided into: dry drum magnetic separator, roll-type magnetic separator machine and roller magnetic separator magnetic separator machine and flat.
Classified according to the number of magnetic system can be divided into: single cylinder magnetic separator, binoculars and modular multi-tube magnetic separator magnetic separator.
According to mine way classification can be divided into: the upper magnetic separator to the mine, the lower magnetic separator to the mine.
Classification according to the magnetic field strength can be divided into: weak magnetic separator, magnetic separator and magnetic separator.
In accordance with the classification of magnetic system can be divided into: an open magnetic circuit dry magnetic separators, closed magnetic circuit magnetic separator.

Permanent   magnetic head pulley Magnetic Pulley ), mainly for the following purposes:
 (also known as 
1, after roughing lean ore crushing or broken after exclusion of surrounding rock and other waste rock, improve quality, reduce the load on the next process.
2 for hematite reduction roasting operation will be closed not fully restored ore sorting, return and then burned.
3, for the ceramics industry in the porcelain clay mixed iron removed to improve the quality of ceramic products.
4, burning coal, foundry sand, refractories and other lines required in addition to iron work.

Features cross belt magnetic separator

Features cross belt magnetic separator is the magnetic system for the electromagnetic system and a large wrap angle magnetic system for 270 °. In order to improve the thermal and moisture by preventing the coil, the inner cylinder is filled with transformer oil; drum speed is slower, 5 revolutions per minute, the belt around the cylinder to slow motion, magnetic products are discharged by a belt excellent dehydration (magnetic tools concentration up to 65% -70%), which is heavy medium recovery and reuse is very important. Cross-belt magnetic separator production capacity, adaptability, simple structure, reliable and easy to operate, small footprint.