Caution Magnetic Separator

Caution magnetic separator
(A) Before use, the transmission should be added to an appropriate amount of gear oil, lubricating all the bearings.
(B) When using a magnetic system angle adjustment: that means pulling the magnetic system to adjust the high-side edge of the magnetic system to adjust to higher level trough unloading at the mine mouth.
(C) before driving should be careful to check the power lines around the gear, lubrication systems, equipment cases, confirmed normal, open the device ministries pipes, then to mine. Stop should be the first stop to the mining, gradually close the water gate. ;
(D); best choice of size of aircraft do not ask for the 60-80 mesh, the lower limit of the effective recovery of sludge is 40 microns.
(E) to determine the size of the ore concentration ore slurry flow rate of a certain amount of time to affect the size of the sorting. High concentration, slow flow, resistance, easily mixed with gangue concentrate, reduce concentrate taste, but because of the long time dressing, beneficial for recovery; the other hand, if low mineral concentration, the concentrate may be higher taste, while tailings taste It will be increased, so that the recovery rate is reduced. Reasonable feed concentration of 25-35%.
(F) a reasonable adjustment to the break up of water and concentrate ore flushing water. Break up too much water, slurry flow rate is too fast, the taste will tailings increased. Conversely, break up small water, mineral particles will not sufficiently loose and affect the separation efficiency, reduce tailings taste. Concentrate rinse water is mainly used for removing the concentrate from the drum skin, rinse water drop size should be able to ensure concentrate discharge it.
(G), please pay attention to protection.
(H) the user maintenance coolant magnetic separators process, should be strictly controlled technical indicators and work space, so as not to affect the sorting effect.